 |
Skema Rangkaian Alarm Kebakaran |
When a number of smoke passes Between a bulb and an LDR, the amount of light falling on the LDR decreases. This Causes the resistance
of the LDR to Increase and the voltage at the base of the transistor is pulled high due to Which the supply to the COB (chip-on-board) is completed. Different cobs are available in the market to generate Different Musical. The choice of the COB depends on the user. The signal generated by COB is amplified by an audio amplifier. In this circuit, the audio power amplifier is wired around TDA2002. The sensitivity of the circuit depends on the distance Between bulb and LDR as well as the setting of preset VR1. Thus by placing the bulb and the LDR at appropriate distances, one May Vary preset VR1 to get optimum sensitivity. An ON / OFF switch is suggested to turn the circuit on and off as Desirable.
of the LDR to Increase and the voltage at the base of the transistor is pulled high due to Which the supply to the COB (chip-on-board) is completed. Different cobs are available in the market to generate Different Musical. The choice of the COB depends on the user. The signal generated by COB is amplified by an audio amplifier. In this circuit, the audio power amplifier is wired around TDA2002. The sensitivity of the circuit depends on the distance Between bulb and LDR as well as the setting of preset VR1. Thus by placing the bulb and the LDR at appropriate distances, one May Vary preset VR1 to get optimum sensitivity. An ON / OFF switch is suggested to turn the circuit on and off as Desirable.
Terima kasih telah membaca artikel tentang Skema Rangkaian Alarm Kebakaran di blog Kumpulan Skema Elektronika jika anda ingin menyebar luaskan artikel ini di mohon untuk mencantumkan link sebagai Sumbernya, dan bila artikel ini bermanfaat silakan bookmark halaman ini diwebbroswer anda, dengan cara menekan Ctrl + D pada tombol keyboard anda.